Hired-hand Funnel Flow Fans Rev 12-03 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Větráky Hired-hand Funnel Flow Fans Rev 12-03. Hired-Hand Funnel Flow Fans Rev 12-03 User Manual [en] [es] [fr] Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 2
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Hired-Hand, Inc. 1733 County Road 68 Bremen, AL 35033 PH 256-287-1000 FAX 256-287-2000
Manual Part No. 4801-5052 Rev 12-03
FUNNEL FLOW FAN
BEFORE INSTALLING FAN
INSTALLATION
!
WARNING!
IMPORTANT!
INSTALLATION
MAINTENANCE
WARRANTY
(See Reverse Side for Framing & Shutter Installation Instructions)
1. Inspect fan for damage in transit. Check for
loose, missing, or damaged parts.
2. If there are any missing parts or if there is
any shipping damage, do not attempt to
operate fan. Contact your Distributor.
1. Disconnect power source before installing or
servicing fan. Failure to disconnect power
source can result in property damage,
serious injury, or death.
2. When connected to an automatic controller,
FAN MAY START AT ANY TIME.
3. IMPORTANT! Before Operating Fan, Inspect
Fan For any Object That May Obstruct Blade
Rotation.
1.
Read WARNING statements before proceeding.
2.
Blades, motor, and wire guards should be cleaned
periodically to decrease vibration and ensure
maximum fan life. Remove dirt with a dry brush or
compressed air. DO NOT SPRAY MOTOR WITH
WATER OR CLEANING FLUIDS.
3. Fan performance may be greatly reduced by
damaged or dirty shutter. Clean and inspect shutter
periodically to ensure maximum fan performance.
When this fan is used in a life support ventilation
system where failure could result in loss or injury,
the user should provide adequate backup
ventilation, or accept the risk of such loss or injury.
1. Fan should be securely mounted to wall. Refer to
mounting instructions on sheet 2 of this manual.
2. Fan is provided with wire guard for your
protection.
National safety codes require that guards be
installed if within 7 feet (2.1 m) of floor or within
reach of personnel or livestock.
FAILURE TO GUARD MOVING PARTS MAY
RESULT IN SERIOUS INJURY OR DEATH.
3. If thermostat is used, connect fan power cord to
controller.
Your Funnel Flow fan has been manufactured with the finest
materials and components available and is backed by a one year
warranty against electrical and mechanical defects in material
and workmanship. If this fan fails to operate during this period,
return it prepaid to place of purchase for repair or replacement
without charge at the manufacturer's option.
Damage by accident or abuse is not covered by this warranty.
This warranty gives you specific legal rights and you may have
other rights that vary from state to state.
Zobrazit stránku 0
1 2

Shrnutí obsahu

Strany 1 - FUNNEL FLOW FAN

Hired-Hand, Inc. • 1733 County Road 68 • Bremen, AL 35033 • PH 256-287-1000 • FAX 256-287-2000 Manual Part No. 4801-5052 Rev 12-03 FUNNEL FLOW FAN

Strany 2 - FRAMING INSTRUCTIONS

Hired-Hand, Inc. • 1733 County Road 68 • Bremen, AL 35033 • PH 256-287-1000 • FAX 256-287-2000 Manual Part No. 4801-5052 Rev 12-03

Komentáře k této Příručce

Žádné komentáře