Hired-hand Funnel Flow Fans: Prop Replacement 48 FF HF Uživatelský manuál stáhnout pdf

HIRED-HAND, INC. • 1733 Co Rd 68 • Bremen, AL 35503 • PHONE 256-287-1000 • FAX 256-287-2000

Manual Part No. 4801-5201

PROP REPLACEMENT

PROP REPLACEMENTPROP REPLACEMENT

PROP REPLACEMENT

WARNING!

WARNING!WARNING!

WARNING!

During Assembly Be Sure That The Motor Is Not

Plugged Into Any Power Source. Always Double

Check Power Sources.

Tools Required

Emery Cloth WD-40

5/32" Allen Head 1/2" Wrench

9/16" Wrench 3/8" Drive 1/2" Socket

3/8" Drive Ratchet

1-1/2" Open End Wrench

Brass Punch (Large)

3/8" Drive 9/16" Socket

Ball Peen Hammer

Pulley Puller (Large)

Removal Of Wire Guard

1. If the fan has a funnel flow cone, remove the wire

guard from the cone. If the fan does not have a

cone, remove the wire guard from the fan housing.

2. CAUTION: Make sure that the power cord is

unplugged from the outlet.

Removal Of Prop

1. Loosen the set screw on the prop and remove

prop.

2. Use emery cloth to remove any rust or deposits on

shaft. Clean and lubricate shaft thoroughly.

Check List Before Prop Installation

1. Inspect motor pulley and prop pulley for correct

alignment. See Figure 1.

2. Inspect belt for wear and proper tension

adjustments.

Installation Of Fiberglass Prop

1. Install TranTorque bushing into the new fiberglass

prop opposite the HH logo as shown in Figure 2.

NOTE: Make sure bushing has bottomed out

against blade hub before tightening bushing.

2. Install TranTorque bushing and prop assembly

onto shaft as shown in Figure 3. NOTE: Shaft

should be flush with end of bushing before

tightening bushing.

3. Check that prop/motor pulley clearance is 2.0" as

shown in Figure 4.

4. Hand tighten the bushing when assembly is in

position.

5. Use 1-1/2" open end wrench and turn 1/4 to 1/2

turn to achieve proper torque as shown in Figure 5.

Wire Guard Installation

1. Install the wire guard to the fan housing or the

funnel flow cone.

2. Verify proper operation of fan.

Funnel-Flow 48" HF

Fig. 3

Fig. 4

Fig. 5

Fig. 2

Fig. 1

Edge Of Prop

PROP REPLACEMENT 1

Shrnutí obsahu

Strany 1 - PROP REPLACEMENT

HIRED-HAND, INC. • 1733 Co Rd 68 • Bremen, AL 35503 • PHONE 256-287-1000 • FAX 256-287-2000 Manual Part No. 4801-5201 PROP REPLACEMENTPROP REPLACEMENT

Komentáře k této Příručce

Žádné komentáře

Hired-hand Funnel Flow Fans: Prop Replacement 48 FF HF Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Větráky Hired-hand Funnel Flow Fans: Prop Replacement 48 FF HF. Hired-Hand Funnel Flow Fans: Prop Replacement 48 FF HF User Manual [en] [de] [es] [fr] [it] [pl] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Větráky Hired-hand Funnel Flow Fans: Prop Replacement 48 FF HF